Take/Retake from functionality is also available on the ‘Capture
Layout’ screen. Select a tile to retake an image for, select the Take/Retake
from button.When a tile is selected in a layout, an image can be added to the tile from any of a variety of different sources (e.g. Sensors, Scanners, etc.) by selecting Group > Layout Options > Take/Retake from ... Or ... by right-clicking on the image and selecting Layout Options > Take/Retake from.
Take/Retake from functionality is also available on the ‘Capture
Layout’ screen. Select a tile to retake an image for, select the Take/Retake
from button.
Unlike Take/Retake which takes/retakes the image from the source that was assigned to the tile, Take/Retake From permits a user to select the source from where the image is to be taken.
Scanner - The software will prepare to capture from an imaging device, if selected.
Sensor - The software will prepare to capture from a digital x-ray sensor, if selected.
File - The software will prepare to acquire images from the local hard drive, network, or media device attached to the computer, if selected.
Clipboard - The software will prepare to acquire an image stored in the computer’s memory via the <copy> function, if selected.
Open Image - The software will prepare to acquire an image that is open on the application desktop, if selected.
Unassociated File - The software will prepare to acquire the image from unassociated files (a file not associated with a tile) contained in the current layout/group. Note: When unassociated images exist in the layout/group, a document stack icon is located in the lower right-hand corner of the layout.
Although
a tile may display the associated tooth number for the image, the imported image
will inherit the tooth numbers associated to the source image if the Open
Image option is selected. If the Clipboard option
is used to import an image into a tile, the image will have no tooth associations.
To add/change tooth associations, right-click on the image and select Tooth
Information from the pop-up menu to access the ‘Modify Tooth
Associations’ dialog box and select the desired teeth from the teeth selection
control.