Apteryx Imaging Upgrade Registration (XrayVision 3.5 and XVLite 1.x or Lower)

To keep up with the latest technology of Apteryx Imaging product, user's of XrayVision 3.5 and XVLite 1.x or Lower must obtain a new registration number for use with this application.

You may obtain your new registration number by following the appropriate instructions:

Re-registration Instructions:

Note: These instructions also apply to MPDx v3.5, Prof.Suni v3.5, VisionDent v3.5, Dr Suni 1.x, et al.

1. Purchase upgrade from Apteryx.

2. Download the latest Apteryx Imaging trial installer.

3. Run the installer and install it directly over your existing Apteryx Imaging installation, usually on your server.

4. If you have already obtained your NEW registration number, click on the Register button and enter it when prompted. Otherwise, continue to step 5.

5. Obtain your Re-registration Info

   • XrayVision Users: Click the I AGREE button, and the Re-registration Information WINDOW will appear.

   • XVlite 1.x and add-on users: Contact Apteryx directly for your new registration number
     
     (YOU MUST BE A CURRENT, REGISTERED USER; or provide proof of purchase and fax to 330-376-0788.)

6. Complete the form on this page, including the Re-registration Code and Old Registration text you copied from the Re-registration Information Window from step 5.

7. When you receive your Upgrade Registration Number, you may open your upgraded software and continue to activate it.