Suni USB II SED Version History

Version 10.1 Build 3
Release Date 11/11/2011

1. Added the ability to capture 1600/1800/1200 sensors using a SuniUSB2000 box. (F937)

Version 10.0 Build 15
3/22/2011

1. Changed default SSI enhancement to Low for SuniRay. (F929)
2. Changed SuniRay detection sensitivity default to 4. (F929)

Version 10.0 Build 14
2/1/2011

1. Removed options tabs for 2000+. (F916)
2. Resolved issue with retaining old filter settings from previous SED versions. (B526)

Version 10.0 Build 12
12/10/2010

1. Now applying Adaptive Normalize to all SuniRay images. (Bug 494)

Version 10.0 Build 11
12/8/2010

1. Resolved memory overflow issue with SuniRay sensor intermittently returning a corner-cut image. (Bug 487)
2. Resolved issue with edge trimming not being applied to SuniRay images. (Bug 492)
3. Resolved issue with image resolution being set to 1x1 when an SSI filter is applied through the SED. (Bug 490)

Version 10.0 Build 10
12/1/2010

1. Modified code to properly handle SuniRay sensors with "X" in the serial number, to avoid corner cutting on the images. (Bug 487)

Version 10.0 Build .9
11/12/2010

1. Resolved SED backwards compatibility issue with pre-3.12 XV by renaming layout tile capture reorient function. (Feature 846)

Version 10.0 Build 8
11/1/2010

1. Adjust shift in defect correction with 2000 boxes and C, D sensors. (Feature 841)

Version 1.2 Build 1
Release Date: 3/30/2010

1. Redesign of the internal imaging engine.
2. Change made to enable support the 64-bit drivers.
3. Defaults changed for 2000 sensors (Gamma = .7; Contrast = +10).
4. Defaults changed for the SuniRay sensors (median filtering).
5. Timeout of the sensor increased.
6. Support option added to produce a raw sensor data file.
7. Watermarks changed in the returned images.

Version 1.1 Build 20
Release Date: 12/29/2009

1. Reverted 2000 sensor flaw correction back to original method.
2. Three column defect correction handling added.
3. Defaults changed for SuniRay sensors (Gamma = .75; Fast median noise reduction; Smooth 3x3 @ 50 factor)
4. Flush time extension option added for 2000 sensor.

Version 1.1 Build 15
8/26/2009

1. Modified Quick Sensor Capture button functionality for USB2000 and SuniRay sensor, so that it checks for the hardware everytime the button is pressed.

Version 1.1 Build 14
7/29/2009

1. Modified to use default pixel correction for both column and row defects when 3 column/row defect is being corrected.

Version 1.1 Build 11
7/23/2009

1. Resolve issue with 3 column defect correction.

Version 1.1 Build 7
Release Date: 1/23/09

1. Removed CRC check for CMOS sensors.
2. Modification for noise correction function.
3. Restored the FPN correction to the original values.
4. Default threshold updated.
5. Added 1.5 second delay before the “sensor ready” green screen is displayed.
6. Added enhancement options similar to Suni Imaging SED.
7. Incorporated newest firmware and generic drivers.
8. Error message that was displayed when a 2000 sensor is plugged in after capturing a suni ray image was corrected.
9. Added random row defect correction code (stitch correction).